- +44 (0) 1746 862555
- enquiries@genvolt.co.uk
- +44 (0) 1746 862555
- enquiries@genvolt.co.uk
The AF05/OF05 adjustable power supply is suitable for capacitor charging although its primary application is for air or oil fume purification. The AF05/OF05 high voltage power supply is also useful with other general-purpose applications and has a range of 10kV, 15kV and 20kV with a power range of 150W, 300W and 450W. The unit is a highly compact and efficient mains powered power supply.
The adjustable power supply has a precise, stable and adjustable output voltage and current controlled by adjusting the potentiometer at the front panel. It is safe and reliable, with a high tolerance to the noise generated by electrical discharges and comes with spark protection that will switch off the output momentarily when the power supply experiences a spark on load.
With its short circuit protection and over-current protection, the Genvolt AF05/OF05 will keep the output current at the same set value in the event of an output short circuit or an output over-current.
The output voltage and current can be adjusted by the two potentiometers located next to the 9-way D type connector. For reliability and control the power supplies are tested with no load, short circuit load and sparking. They are also soak tested for no less than 48 hours at full load, ensuring that our exacting quality requirements and standards are met at all times.
| Input Voltage | 230VAC |
|---|---|
| Input Frequency | 50Hz, 60Hz |
| Output Power | 150W, 300W, 450W |
| Polarity | Negative, Positive |
| Output Adjustable Range | 80% to 100% Voltage |
| Load Regulation | 1% |
| Line Regulation | 1% |
| Operating Temperature | -10°C, 0°C, 10°C, 15°C, 35°C, 40°C, 50°C |
| Operating Humidity | 0 to 90% non-condensing |
| Cooling Method | Air |
| Control | Local and Remote |
| Monitoring | Local and Remote |
| Protection | Arcing, Over-Current, Short Circuit |
The power supply can be controlled by connecting to 9 way D type female connector at the rear.
Each power supply has been tested with no load, a short circuit load and a sparking load. They have also been soak tested for no less than 48 hours at full load.
Our expert team can help you with any questions you may have about this product. Complete the form for a call back or call us during office hours.
Genvolt Engineers have also offered customised technical support to hundreds of customers, who represent countless agencies, research departments and global organisations for multiple products across many applications. The people that work with us know they can trust our vision, products and services as we build strong partnerships.
Our vision is to provide customers, of high voltage technologies, with a high level of support and industry-leading expertise so as to deliver the best solution to their requirements.
